Page Comparison

• Log into the Smartrak Admin site (NZ or AU)
• Go to Import Export > Stops

Image Modified

• This page supplies the blank spreadsheet that is required for uploading stops to a Garmin unit attached to a Smartrak GPS unit, and takes the filled in spreadsheet and does the processing to get those stops to the Garmin
• If you need to make a spreadsheet yourself, please download the spreadsheet and modify it to your needs before uploading below

Image Modified

Step 1: Select Unit to Upload To

Image Modified

Step 2: Upload the Stops Spreadsheet

Image Modified

Step 3: Validate all the Data and Go!

Image Modified

• On the Garmin, you can then scroll through and select them and route to them via the Garmin, the text information appears on the Garmin.
• The locations are removed from the list once the vehicle arrives at the destination, therefore the routes need to be uploaded as required.
• You can delete them all or one by one on the Garmin
• They also appear on the map site as events:

Image Modified

• Please note: You can also send through locations to the Garmin directly via the Smartrak Map site by right clicking on the desired location and selecting Dispatch Location and dispatching the location straight to the Garmin  
• You can send through multiple locations this way too and they will appear on the Garmin in the order that they are sent

Image Modified

Image Modified

• If you are still unable to find an answer to your question, please log a support request via the Smartrak Service Desk