Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
Version 1
Next »
| Why | Access vehicle with your iButton |
|---|
| What | iButton/BuzzeriButton Fob  iButton Receiver  |
| How | BEFORE turning the vehicle Motor on, read and follow these instructions. - Turn the ignition on, until the motor is running.
- Insert your uniquely programmed iButton Fob into the iButton Receiver, this will disable the buzzer.
- Leave iButton on the reader.
- Operate vehicle as usual.
- Turn the ignition off when vehicle is no longer in use and remove the iButton from the reader.
The iButton Fob must be attached to the iButton Receiver after the motor is running. The buzzer will sound if these instructions are not followed. |
