Skip to end of banner
Go to start of banner

KeyMaster - Driver User Guide - WIP

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Getting Started

What is KeyMaster?

KeyMaster® is an affordable, easy-to-use electronic key cabinet. Each key fob is held in place with a locking pin. When a driver enters their Employee ID at the large 7” touch screen the door unlocks, and a light comes on to indicate which key they can take.

How to use KeyMaster

Departing

Once your Poolcar Booking has been confirmed, the keys will be available to you 15 minutes prior to departure.

  1. Go to the KeyMaster cabinet and click Departing on the touchscreen

  2. Enter your Employee ID, Booking ID, or swipe your RFID Swipe Card (follow what is on the prompt on the screen) and press OK

    1. If applicable, answer the Check-out prompt questions set by your organisation

  3. Open the door

  4. Take the key indicated by the green light

  5. Close the door

Please note: If you have made multiple bookings for the same start time you will need to repeat the process above for each booking.

Returning

Once you have finished your booking, you will need to return the keys to the KeyMaster.

  1. Go to the KeyMaster cabinet and click Returning on the touchscreen.

  2. Touch the fob on the key ring against the scanner.

    1. If applicable, answer the Check In questions set by your organisation.

  3. Open the door

  4. Insert the key fob into the slot indicated by the green light until you hear a beep.

  5. Close the door

Please note: Once you have returned a key, you can’t get it back out regardless if your booking is finished or not so “Don’t put the key back until you are done”.

  • No labels