Turn off drivers licence details and retain driver records

Normally PoolCar will not create a driver record if the licence details are disabled on the Welcome page.

The below steps outline an alternative process that can be followed to stop the entering of licence information and still have driver records created.

Instructions

To do this you will need to (roughly) do the following:

Delete all existing Licence Types via SysAdmin Main Menu > System Data > Licence Types
Add a licence type ‘NO LICENCE’ (capital letters is important)
In Application Settings
1. Set Driver licence verification enabled to ‘No’ (In Driver Licence Tab)
2. Set Default Licence State is set to ‘- Select –‘ (In Driver Licence Tab)
3. Set Default Licence Type is set to ‘NO LICENCE’ (In Driver Licence Tab)
4. Set Licence re-verification method to ‘No re-verification beyond initial verification’ (In Driver Licence Tab)
5. Set Drivers can only see bookable assets which match their driver licence type to ‘No’ (In Calendar Tab)
Make sure the Licence-related robots are turned off.

This will result in the following:

There will be an option for ‘Licence Type’ in the Welcome page, but the only option will be the built in ‘- No Licence –‘ and ‘NO LICENCE’.

This, by design, hides all other fields relating to licence from been shown.

The wording can be changed from ‘NO LICENCE’ to something more suitable, i.e., NO LICENCE REQUIRED, NOT REQUIRED, or something similar, please request this is done via the Smartrak Service Desk

If you are unable to find an answer to your question in here please log a support request via the Smartrak Service Desk