- Update a vehicles Hubo/Odometer and Hour Clock reading
- Read all about it here: GPS vs odometer mileage
| Updating a Hubo/an Odometer and Hour Clock reading in Fleet Servicing |
|---|
- Log into the Smartrak Map (NZ or AU)
- Navigate to Fleet Servicing
- Select Resource Overview
- Select Resource from the List
- Select Update resource meters
For Updating an Odometer Reading- Enter Odometer reading
- Enter time reading taken (it is preferable the reading is updated in Smartrak as close to when it is taken as possible)
- Select Update resource
IMPORTANT – If you have had a new hubodometer installed, you must replace the odometer in Fleet Servicing, rather than update the existing. Follow How to Replace the Hubodometer via Fleet Servicing
PLEASE NOTE - in the Update resource meters page if you need to update the odometer, you also need to put a number into the Hour clock field before you can successfully click on Update resource. You can insert any number, even 1 minute. And you need to add a number in even if the vehicle doesn't have an hour clock.  Image Removed Image Added
- ** PLEASE NOTE ** - Sometimes you will see an on-road event associated with an odometer update with extra info "Forced on-road due to large odometer increase
|
For Updating a Hubodometer Reading- Enter hubodometer reading
- You must enter the reading taken now, you cannot go back and select a time for the hubodometer reading like you can with the odometer update.
- Select Update resource
 Image Added
|
- If you are unable to find an answer to your question in here please log a support request via the Smartrak Service Desk
|
Self Help | Service Desk | Service Desk Help | Knowledge Base | Trouble shooting | Smartrak Portfolios