Useful Documents
Installation And Setup Manual
KeyMaster Administrator User Guide
KeyMaster Driver User Guide
1. Send Networking Requirements to IT Department
It is Recommended to send Network Requirements around 2-3 weeks before Installation of your KeyMaster Cabinet is installed as IT team will need time to ensure networking requirements are met
2. Connect Main Power, Key Module Power and USB Cable
Located behind the Control Module
Depending on how many modules there should be 2 types of cables:
USB and Power Daisy Chain which will need to be connected.
Mounting and Power Data Connection guide
KeyMaster Cabinet with single Key Module
KeyMaster Cabinet with Multiple Key Modules
3. Configure Networking on Cabinet
Setting up the network settings
Enter Networking information and Select Configure
Enter Networking info and Select Configure then Select Diagnostic to check connection
You should get all Green arrows
then Select Test Server Connection to check if KeyMaster cabinet is talking to Poolcar server
you should get server connection test successful
4. Do Open Door Test for Each Door
Opening the door as an Admin without a booking
5. Add First Key to Initialize Cabinet
Please add first key. The cabinet will -perform initialization routines to set things up in the background
6. Create Test Booking
Create a booking in Poolcar here:
Creating a Booking
Then check if booking has been drawn by cabinet by:
7. Remove and Return Key
Departing (Remove key)
KeyMaster Driver User Guide Departing
Returning Key
