How to Replace the Hubodometer via Fleet Servicing

Owned by Sarah Masefield
Last updated: 17 Nov, 2023
1 min read

If you fit a new hubodometer to a vehicle (more often a truck rather than a car or a ute), then you need to follow this process in order for RUC licences to continue to pull through from NZTA.

 

Replacing the Hubometer via Fleet Servicing

Replacing the Hubometer via Fleet Servicing

  • Log into the Smartrak Map (NZ or AU)

  • Navigate to Fleet Servicing

  • Click on Replace hubodometer

  • Select the Resource from the dropdown list

  • Enter the New Hubo value (in km)

    • Most likely will be 0 or very close to it, but with a second-hand hubo the reading may be much higher

  • Enter Replacement date and cost (cost is not a required field)

  • Click on Record hubodometer replacement

  • System will confirm with the green highlighted line below.



  • If you are unable to find an answer to your question in here please log a support request via the Smartrak Service Desk



Self Help | Service Desk | Service Desk Help | Knowledge Base | Trouble shooting